for single use
Technical Specification BY 600012098.013-2008

Gastric tubes are used for gastric intubation for the therapeutic and diagnostic purposes and also for enteroalimentation.

Characteristic Features
Tube for the device is made of medical polyvinyl chloride free of phthalates (DEHP / DOP Free). This material is produced at the enterprise with the use of innovative European materials approved in medical practice.

Operational Performance

  • Atraumatic distal tip;
  • Two side holes prevent from risk of blocking;
  • Gastric tubes of size CH 06, 08 and 10 have connector «Luer» for connection to an usual syringe;
  • Thermoplastic material is softened under the influence of body temperature;
  • Colour of the belled connector makes it easy to define size of the catheter in French units;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Material – medical phthalate-free polyvinyl chloride plastic compound.
  2. Shore hardness – А80 or A73.
  3. Sterilization – gas, ethylene oxide (EО).
  4. Packing material – a parcel made of thermoformed film and gas-permeable paper.
  5. Sterile, pyrogen-free, non-toxic
  6. Shelf life in original packing is 5 years from the manufacturing date.
Nominal external
tube diameter, mm
Designation in French unitsConnector colour codeTube length, mmQuantity per box, pcs.
2,0CH 06

green

400,480/790,1000350/150
2,7CH 08

blue

350/150
3,3CH 10

black

350/150
4,0СH 12

white

790,1000150
4,7СH 14

green

150
5,3СH 16

orange

150
6,0СH 18

red

150
6,7СH 20

yellow

125
7,3СH 22

violet

125
8,0СH 24

blue

100
8,3СH 25

white

100
8,7СH 26

transparent

100
9,3СH 28

green

100
10,0СН30

gray

100
10,7СH 32

brown

80
11,7СН 35

black

80

Putting of distal marks and centimeter scale at gastric tube are possible on customer request,
as manufacturing of gastric tubes of other sizes

Registration in Republic of Belarus
Registration in Russian Federation
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.017-2008

Suction catheters are used for tracheobronchial suction.
They are manufactured with a belled connector ora vacuum-control connector.

Characteristic Features
Tube of the catheter is made of medical polyvinyl chloride free of phthalates (DEHP / DOP Free). This material is produced at the enterprise with the use of innovative European materials approved in medical practice.

Operational Performance

  • Atraumatic distal tip;
  • Side holes provides the drainage without risk of blocking;
  • Thermoplastic material is softened under the influence of body temperature;
  • Vacuum-control connector helps to control suction intensity and speed;
  • Colour of the controller makes it easy to define the size of the catheter in French units;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Material – medical phthalate-free polyvinyl chloride plastic compound.
  2. Shore hardness – А 80
  3. Sterilization – gas, ethylene oxide (EО).
  4. Packing material – a parcel made of thermoformed film and gas-permeable paper.
  5. Sterile, pyrogen-free, non-toxic
  6. Shelf life in original packing is 5 years from the manufacturing date.

External diameter of a tube, mm

Designation in French unitsConnector colour codeColour code of vacuum-control connector

Catheter length L, mm

1,7±0,1

CH 05

gray

gray

360±20

480±20

510±20

565±20

2,0±0,1

CH 06

green

green

2,7±0,1

CH 08

blue

blue

3,3±0,1

CH 10

black

black

4,0±0,1

СH 12transparent

red

4,7±0,1

СH 14

green

green

5,3±0,1

СH 16

orange

orange

6,0±0,1

СH 18

red

transparent

6,7±0,1

СH 20

yellow

yellow

Manufacturing of catheters of different length and different quantity of side holes is possible on customer request.

Registration in Republic of Belarus
Registration in Russian Federation
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.011-2007

Urological catheters are intended for bladder irrigation and clearing.

Characteristic Features
Tube of the catheter is made of medical polyvinyl chloride free of phthalates (DEHP / DOP Free). This material is produced at the enterprise with the use of innovative European materials approved in medical practice.
Depending on the way of use catheters are divided into two types:

Operational Performance

  • Atraumatic distal tip;
  • Two side holes provides the best drain without risk of blocking;
  • Thermoplastic material is softened under the influence of body temperature;
  • Belled connector could be used with various types of urine-collecting bags;
  • Colour of the controller makes it easy to define the size of the catheter in French units;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Material – medical phthalate-free polyvinyl chloride plastic compound.
  2. Shore hardness : - male (Nelaton’s catheter) – А 80; - female – А73.
  3. Sizes, colour codes and quantity in a box are mentioned in the table.
  4. Sterilization – gas, ethylene oxide (EО).
  5. Packing material – a parcel made of thermoformed film and gas-permeable paper.
  6. Sterile, pyrogen-free, non-toxic
  7. Shelf life in original packing is 5 years from the manufacturing date.
Size in French unitsColour
code
of a belled
cap
Tube diameter, mmCatheter length, mmQuantity per box, pcs.
CH 06

green

2,0Female200400
Male400350
CH 08

blue

2,7Female200400
Male400350
CH 10

black

3,3Female200400
Male400350
CH 12white4,0Female200400
Male400350
CH 14

green

4,7Female200400
Male400350
CH 16

orange

5,3Female200400
Male400350
CH 18

red

6,0Female200400
Male400350
CH 20

yellow

6,7Female200400
Male400350
CH 22

violet

7,3Female200400
Male400350

Registration in Republic of Belarus
Registration in Russian Federation
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.014-2007

Polyvinyl chloride medical tubes are used for aspirating- syringing of inner lacunas in various areas of surgery.

Characteristic Features
Polyvinyl chloride medical tubes are made of medical polyvinyl chloride free of phthalates (DEHP / DOP Free). This material is produced at the enterprise using innovative European materials approved in medical practice.
It is possible to produce tubes with belled caps in order to use them as extension tube lines.

Operational Performance

  • Smooth surface of the tube reduces fibrin adhesion and provides more effective drainage;
  • Side holes provides the best drainage without risk of blocking;
  • Could be connected to bellows for active suction drain;
  • Thermoplastic material is softened under the influence of body temperature;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Material – medical transparent implantation atoxic PVC
  2. Shore hardness – А 65
  3. Number of side holes is 5
  4. Tube length is 480; 1000, 1500, 2000, 3000 mm. (It is allowed to manufacture a non-sterile tube with a meter in agreement with the customer).
  5. Sterilization – gas, ethylene oxide (EО).
  6. Packing material – a parcel made of thermoformed film and gas-permeable paper.
  7. Sterile, pyrogen-free, non-toxic.
  8. Shelf life in original packing is 5 years from the manufacturing date.

Size table

Size in French unitsInner diameter of a tube, mmOuter diameter of the tube, mmQuantuty per box, pcs.
(tube length 480mm/1000mm)
СH122,64,0350/150
СH143,24,7350/150
СH163,75,3350/150
СH184,36,0350/150
СH204,86,7350/150
СH225,47,3350/150
СH246,08,0350/150
СH256,28,3350/100
СH266,48,7350/100
СH287,09,3350/100
СH307,410,0350/80
СH327,910,7350/80

Manufacturing of unsterile tubes of different lengths (in metres)
as well as manufacturing sterile tubes of different lengths and putting centimeter scale are possible on customer request.

Registration in Republic of Belarus

for single use

Technical Specification BY 600012098.022-2009

Bellows for active suction drain are designed for their connection to drainage tubes in carrying out wound and pus pockets drainage procedure in medical treatment facilities

Characteristic Features
Easy to use.

Operational Performance

  • Transparent walls make it possible to control bellows filling;
  • Connector construction makes it possible to connect tubes and catheters of various sizes;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Bellows material – HDP of medical purpose
  2. Bellows volume: 100; 250; 500 ml, 750 ml, 1000 ml.
  3. Is delivered:
    • in sterile individual package
    • in sterile individual package in set with the drainage tube (for Russian Federation)
    • in unsterile multiple package
  4. Sterilization – gas, ethylene oxide (EО)
  5. Sterile, pyrogen-free, non-toxic
  6. Packing material – a parcel made of thermoformed film and gas-permeable paper
  7. Guaranteed shelf life in the original packaging - 5 years from the date of manufacture
  8. Quantity per box – 80/50/25 pcs

In case of set with the medical drainage PVC tube:

  • Tube material – medical phthalate-free PVC (DEHP/ DOP Free)
  • Standard size (Charriere scale): CH 12, CH 14, CH 16, CH 18, CH 20, CH 22, CH 25, CH 28, CH 30, CH 32
  • Quantity of holes: 5 pieces
  • Length of tube: 480 mm, 1000 mm, 1500 mm, 2000 mm, 3000 mm

Registration in Republic of Belarus
Registration in Russian Federation
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.020-2009

Polymeric urine-collecting bags are used for collection of urine in stationary and ambulatory conditions.
There are two types of the produced polymeric urine-collecting bags– closed or opened, equipped with a non-return valve which prevents reverse flow of urine and discharge set at the bottom of the bag.

Characteristic Features

  • Polymeric urine-collecting bags are made of transparent medical polyvinyl chloride.. This material is produced at the enterprise with the use of innovative European materials approved in medical practice;
  • A connector with a cap at the end of the tube ideally matches any type of catheter.
  • Walls of the urine-collecting bag are transparent for the better control of colour and quantity of urine.

Operational Performance

  • Presence of attaching lug provides safe fixation of the urine-collecting bag;
  • Scale for control of urine quantity;
  • They are supplied sterile in an individual package or non-sterile in a multiple package
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Volume: 0.5; 0.75; 1.0; 1.5; 2.0 liters.
  2. Length of connecting tube: 10; 30; 90; 110; 130 сm.
  3. Sterilization – gas, ethylene oxide (EО).
  4. Individual package (sterile) – a parcel made of thermoformed film and gas-permeable paper.
  5. Sterile inside.
  6. Shelf life in original packing is 5 years from the manufacturing date.
  7. Quantity per box: 0,5l – 60/180 pcs,1l – 50/180 pcs,2l – 60/180 pcs
  8. Individual package is supplied with an application sheet in Russian.

Registration in Republic of Belarus
Registration in Russian Federation
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.012-2006

Enema tip is designed for irrigation and syringing of inner lacunas of human body using devices applicable in health facilities (Esmarch’s irrigator, ball syringe, etc.).

Operational Performance

  • Smooth surface;
  • Connector design makes it possible to connect tubes of different diameters;
  • Individual package contains sealed parcel made of thermoformed composite film and gas-permeable paper with the information relating to the product on it;
  • Sterilized by using of ethylene oxide in sterilization chambers.

Specifications

  1. Length – 108 mm.
  2. Material – polypropylene of medical purpose;
  3. Sterilization – gas, ethylene oxide (EО).
  4. Packing material – a parcel made of thermoformed film and gas-permeable paper.
  5. Sterile.
  6. Shelf life in original packing is 5 years from the manufacturing date.
  7. Quantity per box is 350 pcs.

Registration in Republic of Belarus
Сertificate of conformity of the Russian Federation

for single use
Technical Specification BY 600012098.027-2013

Used for therapeutic and cleansing enema, syringing and irrigation of vagina. The esmarch’s irrigator is produced in 2 versions:

  • with atraumatically distal end
  • with tip.

Operational characteristics

  • Availability of attachment point for safe fixing of esmarch’s irrigator;
  • Availability of retaining valve against the backflow;
  • Scale for the control of fluid volume;

Specifications

  1. The esmarch’s irrigator is produced of the medical material.
  2. Volume: 2 l.
  3. Length of connector tube: 1200; 1300 mm.
  4. Sterilization – gas, ethylene oxide (EО).
  5. Individual package - package of thermoformed film and gas permeable paper.
  6. Sterile, pyrogen-free, non-toxic.
  7. Shelf life in original packing is 5 years from the manufacturing date.
  8. Quantity per box is 60 pcs.

Registration in Republic of Belarus